PPF Boronia

PPF for Boronia Drivers

Boronia drivers come to Liquid R in Mitcham for PPF. The workshop is about 11.7 km from Boronia, roughly 20 minutes by car outside peak hour. PPF, the clear film that stops stone chips, starts at $180 for headlights and runs to $5980 for every painted panel, with a full front from $1980.

The film is a clear urethane layer with a self-healing top coat, so light scratches relax out in the sun. We fit it in our own indoor bays, with the maker’s warranty on the film and ours on the installation, plus a free check in the first month.

Every quote is a fixed figure before the car is booked, and it is the same whichever suburb you come from. Call 1800 985 880 or text 0483 930 888 to book.

Contact Us

Get in touch with us or stop on by to say hey

Give us a call or drop by anytime:
P: 1800 985 880
E: info@liquidr.com.au
A: 12/23A Cook Road Mitcham VIC 3132

Opening hours:
8:30am-5:00pm Monday to Friday
8:30am-12:30pm Saturday

Enquiry & Booking


5000

Vehicles Protected

1000

m² Workshop

50

Years of Combined Experience

10

Dedicated Bays

Two BMW X series SUVs with Defcon Films Australia Glanz film rolls

PPF on the panels that get hit, ceramic coating over the rest, window tint if you want it, bundled at a sharper price for a brand new car. See the packages.

Mercedes G63 with Defcon Films Australia Frozen film roll

Explore Our Services

Colour Transformation: a full colour change in Spectra Colour PPF, no vinyl, no respray.

Ceramic Coating: Gtechniq ceramic and graphene coatings for gloss that rinses clean.

Window Tinting: 3M and Defcon Films Australia films fitted to Victorian legal limits.

Detailing: paint correction, interior deep cleans and PPF refresh.

Customer cars in the Liquid R workshop

Getting Here from Boronia

From Boronia the workshop at 12/23A Cook Road, Mitcham is about 11.7 km away, roughly 20 minutes via EastLink outside peak hour. There is parking on site and a bay booked for your arrival. If you would rather not wait, Mitcham and Heatherdale stations on the Lilydale and Belgrave lines are both about 1.5 km from the workshop. Directions and opening hours are on our contact page.

Paint protection film being trimmed on a panel

What Moves a PPF Quote

Panel area sets the base price and shape does the rest: a deep bumper full of sensors and vents takes far more film and time than a flat bonnet. Swirled or resprayed paint is machine polished first, from $850, because film shows what is under it. The full breakdown is in our PPF cost guide.

Paint protection film being sprayed and laid on a red Audi

How Self-Healing Film Works

PPF is urethane with an elastic top coat, one of the products and technologies we work with. Light scratches and wash marks sit in that top layer, and warmth from the sun or warm water relaxes them back out. A cut through the film is the damage that would otherwise have been in your paint.

Volkswagen Amarok with Bushwrapz in the Liquid R studio

Freeway Kilometres on EastLink

Coming from Boronia usually means time on EastLink. Sitting behind traffic at freeway speed is the classic recipe for a chipped bonnet edge and a pitted bumper, which is why a full front is where most commuters start.

Front end of a red Tesla Model Y

Wear and Tear Pack from $380

Door cups, door edges and the boot ledge pick up marks on every car, however carefully it is driven. This pack covers them in clear film and is the cheapest way to keep a car looking looked after at trade-in.

Customer cars in the Liquid R workshop

Free Check in the First Month

Every film job includes a free inspection in the first month to look over the edges, and we suggest a yearly check after that. Booking it takes a phone call.

Tesla Model Y in satin PPF in the Liquid R studio

Why Customers Come to Us

Boronia is close enough that a separate branch would make no sense. All PPF work happens in Mitcham, in ten indoor bays, done by the same people who quote it. More about who we are, and if you are comparing shops, our guide to the best PPF in Melbourne lists what to check.

Black Tesla Model 3 in the Liquid R studio

Booking and Turnaround

Headlight film is under an hour, a full front about two days and full body film about a week. For Boronia customers we line up drop-off and pickup times when you book, so you know exactly which days the car is with us. We are open weekdays 8:30am to 5:00pm and Saturdays to 12:30pm.

Ceramic coating being applied with an applicator block

Coating Over the Film

A ceramic layer applied over the film in the same booking costs $650. Water sheets off, road grime releases with less scrubbing, and the film keeps its gloss between washes.

Location Map

Map showing the Liquid R workshop location in Mitcham Melbourne

Google Map

Customer Reviews

Real reviews from Liquid R customers, verified and published by hand.

Rated 5 out of 5 from 89 verified customer reviews.

Submit a Review


Common Questions

Frequently asked questions

Straight answers before you book. Anything else, call 1800 985 880.

How far is Liquid R from Boronia?

The workshop at 12/23A Cook Road, Mitcham is about 11.7 km from Boronia, roughly 20 minutes by car outside peak hour.

Is pricing different for Boronia?

No. Every price is the same wherever you live. The quote depends on the car and the work, never the postcode.

Do you come to me, or do I bring the car in?

Every job is done at our Mitcham workshop. Film, coatings and tint need clean indoor bays and proper lighting, which a driveway cannot give, and that is what our results depend on.

Can you see PPF once it is fitted?

Clear gloss film is very hard to spot because edges are wrapped and patterns are cut for the model.

Does PPF turn yellow?

Quality film is UV stable and warranted against yellowing by its maker. Yellowing is a problem of budget film.