Ceramic Coating Scoresby

Ceramic Coating near Scoresby

Liquid R serves Scoresby and the rest of Melbourne’s east from one workshop in Mitcham, about 11.7 km away and roughly 15 minutes by car outside peak hour. Ceramic coating starts at $980 on bare paint, including decontamination and machine polish, and new car packages start at $1090.

Preparation is most of the job: a foam pre-wash, iron and tar removal, clay and machine polishing under inspection lights before the coating goes on. We use Gtechniq Crystal Serum Light and Envoke ProCoat+ 7 Year Graphene Coating, cured indoors.

Every quote is a fixed figure before the car is booked, and it is the same whichever suburb you come from. Call 1800 985 880 or text 0483 930 888 to book.

Contact Us

Get in touch with us or stop on by to say hey

Give us a call or drop by anytime:
P: 1800 985 880
E: info@liquidr.com.au
A: 12/23A Cook Road Mitcham VIC 3132

Opening hours:
8:30am-5:00pm Monday to Friday
8:30am-12:30pm Saturday

Enquiry & Booking


5000

Vehicles Protected

1000

m² Workshop

50

Years of Combined Experience

10

Dedicated Bays

Two Toyota LandCruiser Prados in the Liquid R studio

PPF on the panels that get hit, ceramic coating over the rest, window tint if you want it, bundled at a sharper price for a brand new car. See the packages.

Technician levelling a ceramic coating on a black panel

Explore Our Services

Paint Protection Film: self-healing film for the panels stone chips hit first.

Colour Transformation: a full colour change in Spectra Colour PPF, no vinyl, no respray.

Window Tinting: 3M and Defcon Films Australia films fitted to Victorian legal limits.

Detailing: paint correction, interior deep cleans and PPF refresh.

Customer cars in the Liquid R workshop

Getting Here from Scoresby

Allow roughly 15 minutes from Scoresby outside peak hour. The route is about 11.7 km via EastLink, ending at 12/23A Cook Road, Mitcham, where there is parking out the front. Directions and opening hours are on our contact page.

Machine polishing a black car during paint correction

Water Spots and Bore Water

Sprinklers and bore water leave mineral rings that etch bare paint in the sun. Graphene chemistry in particular resists those spots, and a coated panel releases them with a normal wash.

Customer cars in the Liquid R workshop

Coated Indoors

Coating in a driveway lets wind-blown dust settle into the wet coating. Our bays are indoors, lit for inspection and kept at a steady temperature so the coating cures the way its maker intended.

Volkswagen Amarok with Bushwrapz in the Liquid R studio

Road Grime From the Commute

Freeway driving on roads like EastLink coats a car in road film, bugs and brake dust. A ceramic coating lets most of it rinse off, so the car stays clean longer between washes.

Ceramic coating being applied with an applicator block

Coating Versus Wax

Wax sits on top of the paint and gives up within weeks to sun and shampoo. A ceramic coating bonds and stays for years. Most of our coating customers are former regular waxers who did the sums. More in our ceramic coating myths article.

Ceramic coating being applied with an applicator block

Gtechniq Trained Since 2015

We have been coating cars in Mitcham since 2015 as Gtechniq trained applicators, and we use the full Gtechniq range every week alongside Envoke graphene in our new car packs.

Toyota LandCruiser in matte PPF in the Liquid R studio

One Workshop, in Mitcham

Scoresby is close enough that a separate branch would make no sense. All ceramic coating work happens in Mitcham, in ten indoor bays, done by the same people who quote it. More about who we are, and if you are comparing shops, our guide to the best ceramic coating in Melbourne lists what to check.

Audi RS4 Avant in the Liquid R studio

Planning the Visit

Coatings need curing time, so most cars stay with us for a couple of days. Scoresby is close enough that waiting at home while we work is realistic. Saturday mornings are open 8:30am to 12:30pm.

Wash mitt on a soapy panel

Washing a Coated Car

pH neutral shampoo, a rinse before contact, no brush car washes, and a clean towel or blower to dry, as set out in our guide to washing a coated car. Done that way the coating keeps beading and nothing gritty gets dragged across the paint.

Location Map

Map showing the Liquid R workshop location in Mitcham Melbourne

Google Map

Customer Reviews

Real reviews from Liquid R customers, verified and published by hand.

Rated 5 out of 5 from 89 verified customer reviews.

Submit a Review


Common Questions

Frequently asked questions

Straight answers before you book. Anything else, call 1800 985 880.

How far is Liquid R from Scoresby?

The workshop at 12/23A Cook Road, Mitcham is about 11.7 km from Scoresby, roughly 15 minutes by car outside peak hour.

Is pricing different for Scoresby?

No. Every price is the same wherever you live. The quote depends on the car and the work, never the postcode.

Do you come to me, or do I bring the car in?

Every job is done at our Mitcham workshop. Film, coatings and tint need clean indoor bays and proper lighting, which a driveway cannot give, and that is what our results depend on.

How much is a ceramic coating?

On bare paint it starts at $980 including decontamination and single stage machine polish. New car packages with coating start at $1090, and coating over PPF is $650.

Ceramic or graphene coating?

Both protect the clear coat. Graphene is slicker and spots less on hot panels, which suits cars parked outside.