Ceramic Coating Rowville

Ceramic Coating for Rowville Drivers

Looking for ceramic coating near Rowville? Liquid R is about 17 km away in Mitcham, roughly 20 minutes by car outside peak hour. Ceramic coating starts at $980 on bare paint, including decontamination and machine polish, and new car packages start at $1090.

A coating keeps paint glossy and easy to wash for two to five years in normal Melbourne use. It will not stop stone chips, so plenty of owners pair it with film on the front, which we can fit in the same booking.

Prices are the same wherever you live: the quote depends on the car, not the postcode. Call 1800 985 880 or text 0483 930 888 to book.

Contact Us

Get in touch with us or stop on by to say hey

Give us a call or drop by anytime:
P: 1800 985 880
E: info@liquidr.com.au
A: 12/23A Cook Road Mitcham VIC 3132

Opening hours:
8:30am-5:00pm Monday to Friday
8:30am-12:30pm Saturday

Enquiry & Booking


5000

Vehicles Protected

1000

m² Workshop

50

Years of Combined Experience

10

Dedicated Bays

Two Toyota LandCruiser Prados in the Liquid R studio

PPF on the panels that get hit, ceramic coating over the rest, window tint if you want it, bundled at a sharper price for a brand new car. See the packages.

Technician levelling a ceramic coating on a black panel

Explore Our Services

Paint Protection Film: self-healing film for the panels stone chips hit first.

Colour Transformation: a full colour change in Spectra Colour PPF, no vinyl, no respray.

Window Tinting: 3M and Defcon Films Australia films fitted to Victorian legal limits.

Detailing: paint correction, interior deep cleans and PPF refresh.

Customer cars in the Liquid R workshop

Getting Here from Rowville

Allow roughly 20 minutes from Rowville outside peak hour. The route is about 17 km via EastLink, ending at 12/23A Cook Road, Mitcham, where there is parking out the front. Directions and opening hours are on our contact page.

Wash mitt on a soapy panel

How Long It Lasts

A professionally applied coating protects for two to five years in normal Melbourne use, and well maintained cars have stretched ours toward nine. The wash routine makes most of the difference, and our list of mistakes to avoid after a coating covers the rest.

Headlight protection film being fitted to a red Audi

Lights, Trim and Every Panel

In our packages the coating goes on every external panel, and on headlights, tail lights and exterior trim as well, so the whole car beads and cleans the same way.

White Toyota LandCruiser with Bushwrapz in the Liquid R studio

Road Grime From the Commute

Freeway driving on roads like EastLink coats a car in road film, bugs and brake dust. A ceramic coating lets most of it rinse off, so the car stays clean longer between washes.

Ceramic coating being applied with an applicator block

Ceramic or Graphene

Both cure into a hard layer over the clear coat. Graphene adds a slicker finish and lower surface tension, so it spots less on hot panels. If the car sleeps outside, graphene usually earns its extra cost.

Customer cars in the Liquid R workshop

Preparation Decides the Result

Foam pre-wash, two bucket contact wash, iron and tar removal, clay, then machine polishing under inspection lights. Skip any step and you seal dirt and swirls under glass. This preparation, the same work as a cut and polish, is most of the labour and most of the price.

Tesla Model Y in matte PPF in the Liquid R studio

Why Customers Come to Us

Rowville is close enough that a separate branch would make no sense. All ceramic coating work happens in Mitcham, in ten indoor bays, done by the same people who quote it. More about who we are, and if you are comparing shops, our guide to the best ceramic coating in Melbourne lists what to check.

Silver Ford Mustang in the Liquid R studio

Booking and Turnaround

Coatings need curing time, so most cars stay with us for a couple of days. Tell us when you can drop off and collect, and we schedule the job around those times. We are open weekdays 8:30am to 5:00pm and Saturdays to 12:30pm.

Wash mitt on a soapy panel

New Car Packages from $1090

Pack Essential, $1090, uses Gtechniq Crystal Serum Light. Pack 1, $1390, steps up to Envoke ProCoat+ 7 Year Graphene Coating, and the higher packs add interior protection, wheel coating, tint and front end film. All five are on the packages page.

Silver Ford Mustang in the Liquid R studio

Nearby Areas

Our ceramic coating page has the full range and prices. Nearby, we have also written up Ceramic Coating in Knoxfield, Ceramic Coating in Mulgrave, Ceramic Coating in Ferntree Gully, Ceramic Coating in Dandenong and Ceramic Coating in Springvale, and the local area guides cover the rest of Melbourne.

Location Map

Map showing the Liquid R workshop location in Mitcham Melbourne

Google Map

Customer Reviews

Real reviews from Liquid R customers, verified and published by hand.

Rated 5 out of 5 from 89 verified customer reviews.

Submit a Review


Common Questions

Frequently asked questions

Straight answers before you book. Anything else, call 1800 985 880.

How far is Liquid R from Rowville?

The workshop at 12/23A Cook Road, Mitcham is about 17 km from Rowville, roughly 20 minutes by car outside peak hour.

Do Rowville customers pay the same price?

No. Every price is the same wherever you live. The quote depends on the car and the work, never the postcode.

Do you come to me, or do I bring the car in?

Every job is done at our Mitcham workshop. Film, coatings and tint need clean indoor bays and proper lighting, which a driveway cannot give, and that is what our results depend on.

How long does a ceramic coating last?

Two to five years in normal Melbourne use with a proper wash routine, and longer on well maintained cars.

Does a ceramic coating stop stone chips?

No. It protects against UV, staining, water spots and wash marks. Stone chips need paint protection film.