Ceramic Coating Northcote

Ceramic Coating Northcote: Done in Mitcham

Liquid R serves Northcote and the rest of Melbourne’s north from one workshop in Mitcham, about 23.4 km away and roughly 35 minutes by car outside peak hour. Ceramic coating starts at $980 on bare paint, including decontamination and machine polish, and new car packages start at $1090.

A coating keeps paint glossy and easy to wash for two to five years in normal Melbourne use. It will not stop stone chips, so plenty of owners pair it with film on the front, which we can fit in the same booking.

Prices are the same wherever you live: the quote depends on the car, not the postcode. Call 1800 985 880 or text 0483 930 888 to book.

Contact Us

Get in touch with us or stop on by to say hey

Give us a call or drop by anytime:
P: 1800 985 880
E: info@liquidr.com.au
A: 12/23A Cook Road Mitcham VIC 3132

Opening hours:
Monday to Friday 8:30am-5:00pm
Saturday 8:30am-12:30pm

Enquiry & Booking


5000

Vehicles Protected

1000

m² Workshop

50

Years of Combined Experience

10

Dedicated Bays

Two Toyota LandCruiser Prados in the Liquid R studio

PPF on the panels that get hit, ceramic coating over the rest, window tint if you want it, bundled at a sharper price for a brand new car. See the packages.

Technician levelling a ceramic coating on a black panel

Explore Our Services

Paint Protection Film: self-healing film for the panels stone chips hit first.

Colour Transformation: a full colour change in Spectra Colour PPF, no vinyl, no respray.

Window Tinting: 3M and Defcon Films Australia films fitted to Victorian legal limits.

Detailing: paint correction, interior deep cleans and PPF refresh.

Customer cars in the Liquid R workshop

Northcote to Mitcham

Allow roughly 35 minutes from Northcote outside peak hour. The route is about 23.4 km via Eastern Freeway, ending at 12/23A Cook Road, Mitcham, where there is parking out the front. Directions and opening hours are on our contact page.

Machine polishing a black car during paint correction

Water Spots and Bore Water

Sprinklers and bore water leave mineral rings that etch bare paint in the sun. Graphene chemistry in particular resists those spots, and a coated panel releases them with a normal wash.

Customer cars in the Liquid R workshop

Coated Indoors

Coating in a driveway lets wind-blown dust settle into the wet coating. Our bays are indoors, lit for inspection and kept at a steady temperature so the coating cures the way its maker intended.

White Toyota LandCruiser with Bushwrapz in the Liquid R studio

Road Grime From the Commute

Freeway driving on roads like Eastern Freeway coats a car in road film, bugs and brake dust. A ceramic coating lets most of it rinse off, so the car stays clean longer between washes.

Black paint under an inspection light

Preparation Decides the Result

Foam pre-wash, two bucket contact wash, iron and tar removal, clay, then machine polishing under inspection lights. Skip any step and you seal dirt and swirls under glass. This preparation, the same work as a cut and polish, is most of the labour and most of the price.

Wash mitt on a soapy panel

New Car Packages from $1090

Pack Essential, $1090, uses Gtechniq Crystal Serum Light. Pack 1, $1390, steps up to Envoke ProCoat+ 7 Year Graphene Coating, and the higher packs add interior protection, wheel coating, tint and front end film. All five are on the packages page.

Black Ferrari Roma in the Liquid R studio

One Workshop, in Mitcham

We are not a mobile service and we do not have a Northcote shopfront. The work is done in Mitcham because ceramic coating needs dust-free bays, inspection lighting and time, all of which a driveway lacks. More about who we are, and if you are comparing shops, our guide to the best ceramic coating in Melbourne lists what to check.

Black Ferrari Roma in the Liquid R studio

Booking and Turnaround

Coatings need curing time, so most cars stay with us for a couple of days. We agree the drop-off and pickup times with you up front, so a trip from Northcote fits your week rather than the other way round. We are open weekdays 8:30am to 5:00pm and Saturdays to 12:30pm.

Ceramic coating being applied with an applicator block

Ceramic Coating from $980

On bare paint, ceramic coating starts at $980. That price includes the part of the job that decides the result: decontamination, iron and tar removal, clay and a single stage machine polish before the coating goes on.

Location Map

Map showing the Liquid R workshop location in Mitcham Melbourne

Google Map

Customer Reviews

Real reviews from Liquid R customers, verified and published by hand.

Rated 5 out of 5 from 89 verified customer reviews.

Submit a Review


Common Questions

Frequently asked questions

Straight answers before you book. Anything else, call 1800 985 880.

How far is Liquid R from Northcote?

The workshop at 12/23A Cook Road, Mitcham is about 23.4 km from Northcote, roughly 35 minutes by car outside peak hour.

Is pricing different for Northcote?

No. Every price is the same wherever you live. The quote depends on the car and the work, never the postcode.

Do you come to me, or do I bring the car in?

Every job is done at our Mitcham workshop. Film, coatings and tint need clean indoor bays and proper lighting, which a driveway cannot give, and that is what our results depend on.

Why not use a DIY ceramic kit?

DIY kits skip the preparation. Applied over contaminated, uncorrected paint they lock in the problems and last a fraction as long.

Is a ceramic coating worth it?

If you keep the car more than a couple of years, usually yes. It replaces the wax cycle and keeps the paint from dulling.