Ceramic Coating Keilor

Ceramic Coating for Keilor Drivers

Liquid R serves Keilor and the rest of Melbourne’s west from one workshop in Mitcham, about 44 km away and roughly 55 minutes by car outside peak hour. Ceramic coating starts at $980 on bare paint, including decontamination and machine polish, and new car packages start at $1090.

Preparation is most of the job: a foam pre-wash, iron and tar removal, clay and machine polishing under inspection lights before the coating goes on. We use Gtechniq Crystal Serum Light and Envoke ProCoat+ 7 Year Graphene Coating, cured indoors.

Customers from Keilor pay the same as everyone else, because the price follows the car and the work. Call 1800 985 880 or text 0483 930 888 to book.

Contact Us

Get in touch with us or stop on by to say hey

Give us a call or drop by anytime:
P: 1800 985 880
E: info@liquidr.com.au
A: 12/23A Cook Road Mitcham VIC 3132

Opening hours:
Monday to Friday 8:30am-5:00pm
Saturday 8:30am-12:30pm

Enquiry & Booking


5000

Vehicles Protected

1000

m² Workshop

50

Years of Combined Experience

10

Dedicated Bays

Two Toyota LandCruiser Prados in the Liquid R studio

PPF on the panels that get hit, ceramic coating over the rest, window tint if you want it, bundled at a sharper price for a brand new car. See the packages.

Technician levelling a ceramic coating on a black panel

Explore Our Services

Paint Protection Film: self-healing film for the panels stone chips hit first.

Colour Transformation: a full colour change in Spectra Colour PPF, no vinyl, no respray.

Window Tinting: 3M and Defcon Films Australia films fitted to Victorian legal limits.

Detailing: paint correction, interior deep cleans and PPF refresh.

Customer cars in the Liquid R workshop

Getting Here from Keilor

The run from Keilor to Cook Road in Mitcham is about 44 km via Eastern Freeway and CityLink. Outside peak hour that is around 55 minutes, and you park on site when you arrive. Directions and opening hours are on our contact page.

Customer cars in the Liquid R workshop

Coated Indoors

Coating in a driveway lets wind-blown dust settle into the wet coating. Our bays are indoors, lit for inspection and kept at a steady temperature so the coating cures the way its maker intended.

Ceramic coating being applied with an applicator block

Gtechniq Trained Since 2015

We have been coating cars in Mitcham since 2015 as Gtechniq trained applicators, and we use the full Gtechniq range every week alongside Envoke graphene in our new car packs.

BYD Shark 6 with Bushwrapz in the Liquid R studio

Road Grime From the Commute

Freeway driving on roads like Eastern Freeway coats a car in road film, bugs and brake dust. A ceramic coating lets most of it rinse off, so the car stays clean longer between washes.

Gtechniq wheel coating being applied to an alloy wheel

Wheel Ceramic at $60 a Wheel

Brake dust bakes onto bare alloys and pits the finish. A wheel ceramic, $60 per wheel, handles the heat and lets the dust rinse off before it bonds.

Wash mitt on a soapy panel

Washing a Coated Car

pH neutral shampoo, a rinse before contact, no brush car washes, and a clean towel or blower to dry, as set out in our guide to washing a coated car. Done that way the coating keeps beading and nothing gritty gets dragged across the paint.

Ford Ranger in the Liquid R studio

Why Customers Come to Us

Let us be straight: Mitcham is not around the corner from Keilor. What you get for the drive is indoor bays, inspection lighting and our own team on your car, rather than a van in a car park. More about who we are, and if you are comparing shops, our guide to the best ceramic coating in Melbourne lists what to check.

Matte grey Ford Ranger Raptor in the Liquid R studio

Planning the Visit

Coatings need curing time, so most cars stay with us for a couple of days. Because of the distance, we plan the work so the car needs one drop-off and one pickup, even when several jobs are booked together. We confirm the timing when you book.

Ceramic coating being applied with an applicator block

Coating an Older Car

Older paint often shows the biggest change. The process is the same: decontaminate, correct what correction can fix, then coat. The coating locks in the corrected finish and makes it far easier to keep.

Location Map

Map showing the Liquid R workshop location in Mitcham Melbourne

Google Map

Customer Reviews

Real reviews from Liquid R customers, verified and published by hand.

Rated 5 out of 5 from 89 verified customer reviews.

Submit a Review


Common Questions

Frequently asked questions

Straight answers before you book. Anything else, call 1800 985 880.

How far is Liquid R from Keilor?

The workshop at 12/23A Cook Road, Mitcham is about 44 km from Keilor, roughly 55 minutes by car outside peak hour.

Is pricing different for Keilor?

No. Every price is the same wherever you live. The quote depends on the car and the work, never the postcode.

Do you come to me, or do I bring the car in?

Every job is done at our Mitcham workshop. Film, coatings and tint need clean indoor bays and proper lighting, which a driveway cannot give, and that is what our results depend on.

How long does a ceramic coating last?

Two to five years in normal Melbourne use with a proper wash routine, and longer on well maintained cars.

Can you coat an older car?

Yes. Older paint is decontaminated and corrected first, then coated, and often shows the biggest change.