Ceramic Coating Sunshine

Ceramic Coating Sunshine: Done in Mitcham

Liquid R serves Sunshine and the rest of Melbourne’s west from one workshop in Mitcham, about 37.7 km away and roughly 55 minutes by car outside peak hour. Ceramic coating starts at $980 on bare paint, including decontamination and machine polish, and new car packages start at $1090.

Preparation is most of the job: a foam pre-wash, iron and tar removal, clay and machine polishing under inspection lights before the coating goes on. We use Gtechniq Crystal Serum Light and Envoke ProCoat+ 7 Year Graphene Coating, cured indoors.

Customers from Sunshine pay the same as everyone else, because the price follows the car and the work. Call 1800 985 880 or text 0483 930 888 to book.

Contact Us

Get in touch with us or stop on by to say hey

Give us a call or drop by anytime:
P: 1800 985 880
E: info@liquidr.com.au
A: 12/23A Cook Road Mitcham VIC 3132

Opening hours:
Monday to Friday 8:30am-5:00pm
Saturday 8:30am-12:30pm

Enquiry & Booking


5000

Vehicles Protected

1000

m² Workshop

50

Years of Combined Experience

10

Dedicated Bays

Two Toyota LandCruiser Prados in the Liquid R studio

PPF on the panels that get hit, ceramic coating over the rest, window tint if you want it, bundled at a sharper price for a brand new car. See the packages.

Technician levelling a ceramic coating on a black panel

Explore Our Services

Paint Protection Film: self-healing film for the panels stone chips hit first.

Colour Transformation: a full colour change in Spectra Colour PPF, no vinyl, no respray.

Window Tinting: 3M and Defcon Films Australia films fitted to Victorian legal limits.

Detailing: paint correction, interior deep cleans and PPF refresh.

Customer cars in the Liquid R workshop

The Drive from Sunshine

Allow roughly 55 minutes from Sunshine outside peak hour. The route is about 37.7 km via Eastern Freeway, ending at 12/23A Cook Road, Mitcham, where there is parking out the front. Directions and opening hours are on our contact page.

Ceramic coating being applied with an applicator block

Coating an Older Car

Older paint often shows the biggest change. The process is the same: decontaminate, correct what correction can fix, then coat. The coating locks in the corrected finish and makes it far easier to keep.

Machine polishing a black car during paint correction

Water Spots and Bore Water

Sprinklers and bore water leave mineral rings that etch bare paint in the sun. Graphene chemistry in particular resists those spots, and a coated panel releases them with a normal wash.

BYD Shark 6 with Bushwrapz in the Liquid R studio

Road Grime From the Commute

Freeway driving on roads like Eastern Freeway coats a car in road film, bugs and brake dust. A ceramic coating lets most of it rinse off, so the car stays clean longer between washes.

Headlight protection film being fitted to a red Audi

Lights, Trim and Every Panel

In our packages the coating goes on every external panel, and on headlights, tail lights and exterior trim as well, so the whole car beads and cleans the same way.

Customer cars in the Liquid R workshop

Preparation Decides the Result

Foam pre-wash, two bucket contact wash, iron and tar removal, clay, then machine polishing under inspection lights. Skip any step and you seal dirt and swirls under glass. This preparation, the same work as a cut and polish, is most of the labour and most of the price.

Tesla Model Y in the Liquid R studio

Sunshine Customers, One Workshop

We have no branch out near Sunshine, only our Mitcham workshop. If the drive suits you, the work is done indoors by staff who do this every day, and the booking is planned around a single trip. More about who we are, and if you are comparing shops, our guide to the best ceramic coating in Melbourne lists what to check.

Silver Tesla Model 3 in the Liquid R studio

Planning the Visit

Coatings need curing time, so most cars stay with us for a couple of days. From Sunshine, most people bundle work into one visit: tint with a detail, or film with a coating, so the car only makes the trip once. We confirm the timing when you book.

Wash mitt on a soapy panel

Washing a Coated Car

pH neutral shampoo, a rinse before contact, no brush car washes, and a clean towel or blower to dry, as set out in our guide to washing a coated car. Done that way the coating keeps beading and nothing gritty gets dragged across the paint.

Location Map

Map showing the Liquid R workshop location in Mitcham Melbourne

Google Map

Customer Reviews

Real reviews from Liquid R customers, verified and published by hand.

Rated 5 out of 5 from 89 verified customer reviews.

Submit a Review


Common Questions

Frequently asked questions

Straight answers before you book. Anything else, call 1800 985 880.

How far is Liquid R from Sunshine?

The workshop at 12/23A Cook Road, Mitcham is about 37.7 km from Sunshine, roughly 55 minutes by car outside peak hour.

Who does the best ceramic coating near Sunshine?

Judge any shop on the things that decide the result: a professional grade coating, full decontamination and machine polish first, indoor curing and a written warranty. That is how we work at our Mitcham workshop, about 37.7 km from Sunshine, and we are happy to show you finished cars before you book.

Is pricing different for Sunshine?

No. Every price is the same wherever you live. The quote depends on the car and the work, never the postcode.

Do you come to me, or do I bring the car in?

Every job is done at our Mitcham workshop. Film, coatings and tint need clean indoor bays and proper lighting, which a driveway cannot give, and that is what our results depend on.

How much is a ceramic coating?

On bare paint it starts at $980 including decontamination and single stage machine polish. New car packages with coating start at $1090, and coating over PPF is $650.

Is a ceramic coating worth it?

If you keep the car more than a couple of years, usually yes. It replaces the wax cycle and keeps the paint from dulling.