Ceramic Coating Forest Hill

Ceramic Coating near Forest Hill

Looking for ceramic coating near Forest Hill? Liquid R is about 5.2 km away in Mitcham, roughly 10 minutes by car outside peak hour. Ceramic coating starts at $980 on bare paint, including decontamination and machine polish, and new car packages start at $1090.

Preparation is most of the job: a foam pre-wash, iron and tar removal, clay and machine polishing under inspection lights before the coating goes on. We use Gtechniq Crystal Serum Light and Envoke ProCoat+ 7 Year Graphene Coating, cured indoors.

Prices are the same wherever you live: the quote depends on the car, not the postcode. Call 1800 985 880 or text 0483 930 888 to book.

Contact Us

Get in touch with us or stop on by to say hey

Give us a call or drop by anytime:
P: 1800 985 880
E: info@liquidr.com.au
A: 12/23A Cook Road Mitcham VIC 3132

Opening hours:
8:30am-5:00pm Monday to Friday
8:30am-12:30pm Saturday

Enquiry & Booking


5000

Vehicles Protected

1000

m² Workshop

50

Years of Combined Experience

10

Dedicated Bays

Two Toyota LandCruiser Prados in the Liquid R studio

PPF on the panels that get hit, ceramic coating over the rest, window tint if you want it, bundled at a sharper price for a brand new car. See the packages.

Technician levelling a ceramic coating on a black panel

Explore Our Services

Paint Protection Film: self-healing film for the panels stone chips hit first.

Colour Transformation: a full colour change in Spectra Colour PPF, no vinyl, no respray.

Window Tinting: 3M and Defcon Films Australia films fitted to Victorian legal limits.

Detailing: paint correction, interior deep cleans and PPF refresh.

Customer cars in the Liquid R workshop

Forest Hill to Mitcham

Allow roughly 10 minutes from Forest Hill outside peak hour. The route is about 5.2 km via Whitehorse Road, ending at 12/23A Cook Road, Mitcham, where there is parking out the front. Directions and opening hours are on our contact page.

Headlight protection film being fitted to a red Audi

Lights, Trim and Every Panel

In our packages the coating goes on every external panel, and on headlights, tail lights and exterior trim as well, so the whole car beads and cleans the same way.

Ceramic coating being applied with an applicator block

Gtechniq Trained Since 2015

We have been coating cars in Mitcham since 2015 as Gtechniq trained applicators, and we use the full Gtechniq range every week alongside Envoke graphene in our new car packs.

Wash mitt on a soapy panel

Trees, Birds and Parking Outside

Cars parked on the street or under trees collect sap and bird droppings that etch bare paint in the sun. A coated surface buys time and releases them with a gentle wash.

Customer cars in the Liquid R workshop

Preparation Decides the Result

Foam pre-wash, two bucket contact wash, iron and tar removal, clay, then machine polishing under inspection lights. Skip any step and you seal dirt and swirls under glass. This preparation, the same work as a cut and polish, is most of the labour and most of the price.

Wash mitt on a soapy panel

New Car Packages from $1090

Pack Essential, $1090, uses Gtechniq Crystal Serum Light. Pack 1, $1390, steps up to Envoke ProCoat+ 7 Year Graphene Coating, and the higher packs add interior protection, wheel coating, tint and front end film. All five are on the packages page.

Blue Subaru BRZ tS in the Liquid R studio

Forest Hill Customers, One Workshop

There is one Liquid R, on Cook Road in Mitcham, a short trip from Forest Hill. Keeping every ceramic coating job under one roof is how we keep the standard the same on every car. More about who we are, and if you are comparing shops, our guide to the best ceramic coating in Melbourne lists what to check.

Ceramic coating being applied with an applicator block

How Long the Car Stays

Coatings need curing time, so most cars stay with us for a couple of days. Forest Hill is close enough that waiting at home while we work is realistic. Saturday mornings are open 8:30am to 12:30pm.

Water beading on ceramic coated paint

Ceramic Coating from $980

On bare paint, ceramic coating starts at $980. That price includes the part of the job that decides the result: decontamination, iron and tar removal, clay and a single stage machine polish before the coating goes on.

Location Map

Map showing the Liquid R workshop location in Mitcham Melbourne

Google Map

Customer Reviews

Real reviews from Liquid R customers, verified and published by hand.

Rated 5 out of 5 from 89 verified customer reviews.

Submit a Review


Common Questions

Frequently asked questions

Straight answers before you book. Anything else, call 1800 985 880.

How far is Liquid R from Forest Hill?

The workshop at 12/23A Cook Road, Mitcham is about 5.2 km from Forest Hill, roughly 10 minutes by car outside peak hour.

Is pricing different for Forest Hill?

No. Every price is the same wherever you live. The quote depends on the car and the work, never the postcode.

Do you come to me, or do I bring the car in?

Every job is done at our Mitcham workshop. Film, coatings and tint need clean indoor bays and proper lighting, which a driveway cannot give, and that is what our results depend on.

Why not use a DIY ceramic kit?

DIY kits skip the preparation. Applied over contaminated, uncorrected paint they lock in the problems and last a fraction as long.

Can you coat an older car?

Yes. Older paint is decontaminated and corrected first, then coated, and often shows the biggest change.