Car Detailing Footscray

Car Detailing for Footscray Drivers

Looking for car detailing near Footscray? Liquid R is about 31.6 km away in Mitcham, roughly 45 minutes by car outside peak hour. Detailing covers decontamination, staged machine correction and full interior work, with machine polishing from $850.

A proper detail starts with decontamination to lift iron, tar and water minerals, then staged machine correction under inspection lights, never a hard cut over the whole car. Inside, carpets are extracted and leather is cleaned and protected.

Prices are the same wherever you live: the quote depends on the car, not the postcode. Call 1800 985 880 or text 0483 930 888 to book.

Contact Us

Get in touch with us or stop on by to say hey

Give us a call or drop by anytime:
P: 1800 985 880
E: info@liquidr.com.au
A: 12/23A Cook Road Mitcham VIC 3132

Opening hours:
Monday to Friday 8:30am-5:00pm
Saturday 8:30am-12:30pm

Enquiry & Booking


5000

Vehicles Protected

1000

m² Workshop

50

Years of Combined Experience

10

Dedicated Bays

Two Toyota LandCruiser Prados in the Liquid R studio

PPF on the panels that get hit, ceramic coating over the rest, window tint if you want it, bundled at a sharper price for a brand new car. See the packages.

Pouring ceramic coating onto an applicator

Explore Our Services

Paint Protection Film: self-healing film for the panels stone chips hit first.

Colour Transformation: a full colour change in Spectra Colour PPF, no vinyl, no respray.

Ceramic Coating: Gtechniq ceramic and graphene coatings for gloss that rinses clean.

Window Tinting: 3M and Defcon Films Australia films fitted to Victorian legal limits.

Customer cars in the Liquid R workshop

Footscray to Mitcham

From Footscray the workshop at 12/23A Cook Road, Mitcham is about 31.6 km away, roughly 45 minutes via Eastern Freeway outside peak hour. There is parking on site and a bay booked for your arrival. Directions and opening hours are on our contact page.

Machine polishing a black car during paint correction

Exterior Detailing

Full decontamination, then staged machine correction, what most Australians call a cut and polish, to cut back swirl marks, light scratches and oxidation before polishing to a deep gloss. It changes how the paint reads in daylight.

Machine polishing a black car during paint correction

How Long a Detail Takes

A maintenance detail is usually a day. Correction runs one to three days depending on the paint. We would rather keep the car an extra morning than hand back a rushed panel. Show cars get more time again, see prestige car detailing.

White Toyota LandCruiser with Bushwrapz in the Liquid R studio

Commuter Car Grime

Daily runs on Eastern Freeway leave iron particles and brake dust bonded to the paint and wheels. A proper detail removes them before they etch, and a coating afterwards slows the build-up.

Black paint under an inspection light

Swirls, Water Spots and Sun Damage

Melbourne paint collects wash swirls from brush car washes, mineral rings from sprinklers, oxidised patches from years of UV and fine car park door marks. Each has its own fix, and most look worse than they are. Dark paint shows them most, as our article on protecting dark cars explains.

Black paint under an inspection light

Cut and Polish from $850

Machine polishing starts from $850. We start with the lightest cut that shows a result and work the deeper defects individually, because clear coat is finite and modern cars have less of it than ever.

Customer cars in the Liquid R workshop

One Workshop, in Mitcham

We have no branch out near Footscray, only our Mitcham workshop. If the drive suits you, the work is done indoors by staff who do this every day, and the booking is planned around a single trip. More about who we are, and if you are comparing shops, our guide to the best car detailing in Melbourne lists what to check.

Wash mitt on a soapy panel

How Long the Car Stays

A maintenance detail is usually a day, and correction runs one to three days. Because of the distance, we plan the work so the car needs one drop-off and one pickup, even when several jobs are booked together. We confirm the timing when you book.

Wash mitt on a soapy panel

Water Spot Removal

Mineral rings from sprinklers and summer rain etch into paint and glass if they sit. Fresh spots wash off, older ones need a dedicated remover or a polish, and we tell you which before we start. Our washing dos and don’ts help stop them coming back.

Location Map

Map showing the Liquid R workshop location in Mitcham Melbourne

Google Map

Customer Reviews

Real reviews from Liquid R customers, verified and published by hand.

Rated 5 out of 5 from 89 verified customer reviews.

Submit a Review


Common Questions

Frequently asked questions

Straight answers before you book. Anything else, call 1800 985 880.

How far is Liquid R from Footscray?

The workshop at 12/23A Cook Road, Mitcham is about 31.6 km from Footscray, roughly 45 minutes by car outside peak hour.

Is pricing different for Footscray?

No. Every price is the same wherever you live. The quote depends on the car and the work, never the postcode.

Do you come to me, or do I bring the car in?

Every job is done at our Mitcham workshop. Film, coatings and tint need clean indoor bays and proper lighting, which a driveway cannot give, and that is what our results depend on.

What is in each detailing package?

Basic is a decontamination wash and interior clean, Deluxe adds machine polish and interior protection, and Premium adds multi-stage correction and protection.

How much is a car detail?

Machine polishing starts from $850. Interior and maintenance details are quoted on the car, and correction is quoted after inspection.