Car Detailing Burwood

Car Detailing for Burwood Drivers

Looking for car detailing near Burwood? Liquid R is about 15.7 km away in Mitcham, roughly 25 minutes by car outside peak hour. Detailing covers decontamination, staged machine correction and full interior work, with machine polishing from $850.

We offer Basic, Deluxe and Premium levels, from a decontamination wash and interior clean through to multi-stage correction and protection inside and out, confirmed on your quote after we see the car.

Every quote is a fixed figure before the car is booked, and it is the same whichever suburb you come from. Call 1800 985 880 or text 0483 930 888 to book.

Contact Us

Get in touch with us or stop on by to say hey

Give us a call or drop by anytime:
P: 1800 985 880
E: info@liquidr.com.au
A: 12/23A Cook Road Mitcham VIC 3132

Opening hours:
8:30am-5:00pm Monday to Friday
8:30am-12:30pm Saturday

Enquiry & Booking


5000

Vehicles Protected

1000

m² Workshop

50

Years of Combined Experience

10

Dedicated Bays

Two Toyota LandCruiser Prados in the Liquid R studio

PPF on the panels that get hit, ceramic coating over the rest, window tint if you want it, bundled at a sharper price for a brand new car. See the packages.

Pouring ceramic coating onto an applicator

Explore Our Services

Paint Protection Film: self-healing film for the panels stone chips hit first.

Colour Transformation: a full colour change in Spectra Colour PPF, no vinyl, no respray.

Ceramic Coating: Gtechniq ceramic and graphene coatings for gloss that rinses clean.

Window Tinting: 3M and Defcon Films Australia films fitted to Victorian legal limits.

Customer cars in the Liquid R workshop

Burwood to Mitcham

Allow roughly 25 minutes from Burwood outside peak hour. The route is about 15.7 km via Burwood Highway, ending at 12/23A Cook Road, Mitcham, where there is parking out the front. Directions and opening hours are on our contact page.

Gtechniq wheel coating being applied to an alloy wheel

Wheels and Calipers

Brake dust bakes onto wheels and calipers first. After cleaning we can apply a high temperature wheel ceramic, $60 per wheel, so the dust rinses off between details.

Machine polishing a black car during paint correction

Water Spot Removal

Mineral rings from sprinklers and summer rain etch into paint and glass if they sit. Fresh spots wash off, older ones need a dedicated remover or a polish, and we tell you which before we start. Our washing dos and don’ts help stop them coming back.

White Toyota LandCruiser with Bushwrapz in the Liquid R studio

Commuter Car Grime

Daily runs on Burwood Highway leave iron particles and brake dust bonded to the paint and wheels. A proper detail removes them before they etch, and a coating afterwards slows the build-up.

Machine polishing a black car during paint correction

Seal the Work After Correction

Freshly corrected paint is bare. A ceramic coating, from $980 including single stage correction, locks in the finish. Correcting without sealing means paying for the same result twice.

Customer cars in the Liquid R workshop

Indoors, Under Proper Lights

Every detail is done in our indoor bays, lit for inspection so defects are visible while we work. Polishing outdoors in bright sun hides swirls that show up later. More on what a proper detail changes.

Toyota LandCruiser 79 Series in matte PPF in the Liquid R studio

Burwood Customers, One Workshop

Every car from Burwood goes into the same indoor bays in Mitcham as every other car. One site, our own staff and no subcontractors is how the warranty stays simple. More about who we are, and if you are comparing shops, our guide to the best car detailing in Melbourne lists what to check.

GWM Tank 300 in the Liquid R studio

Planning the Visit

A maintenance detail is usually a day, and correction runs one to three days. Tell us when you can drop off and collect, and we schedule the job around those times. We are open weekdays 8:30am to 5:00pm and Saturdays to 12:30pm.

Leather protection being applied to a cream seat

Interior Only Bookings

You do not need an exterior package to get the cabin sorted. Full extraction, leather care, odour treatment and optional fabric or leather protection can be booked on their own.

Location Map

Map showing the Liquid R workshop location in Mitcham Melbourne

Google Map

Customer Reviews

Real reviews from Liquid R customers, verified and published by hand.

Rated 5 out of 5 from 89 verified customer reviews.

Submit a Review


Common Questions

Frequently asked questions

Straight answers before you book. Anything else, call 1800 985 880.

How far is Liquid R from Burwood?

The workshop at 12/23A Cook Road, Mitcham is about 15.7 km from Burwood, roughly 25 minutes by car outside peak hour.

Is pricing different for Burwood?

No. Every price is the same wherever you live. The quote depends on the car and the work, never the postcode.

Do you come to me, or do I bring the car in?

Every job is done at our Mitcham workshop. Film, coatings and tint need clean indoor bays and proper lighting, which a driveway cannot give, and that is what our results depend on.

How long does a full detail take?

A maintenance detail is usually a day. Correction work runs one to three days depending on the paint.

Is detailing worth it before selling?

Almost always. The detail usually costs less than the first haggle a tired car invites.