PPF St Albans

PPF St Albans: Fitted in Mitcham

Liquid R serves St Albans and the rest of Melbourne’s west from one workshop in Mitcham, about 46.5 km away and roughly 60 minutes by car outside peak hour. PPF, the clear film that stops stone chips, starts at $180 for headlights and runs to $5980 for every painted panel, with a full front from $1980.

Most drivers start with a full front: bonnet, bumper, guards and mirrors in self-healing film, fitted from patterns cut for the exact model so no blade touches the paint. Clear gloss and satin films come from Defcon Films Australia first and STEK second, and both are warranted in writing.

Customers from St Albans pay the same as everyone else, because the price follows the car and the work. Call 1800 985 880 or text 0483 930 888 to book.

Contact Us

Get in touch with us or stop on by to say hey

Give us a call or drop by anytime:
P: 1800 985 880
E: info@liquidr.com.au
A: 12/23A Cook Road Mitcham VIC 3132

Opening hours:
Monday to Friday 8:30am-5:00pm
Saturday 8:30am-12:30pm

Enquiry & Booking


5000

Vehicles Protected

1000

m² Workshop

50

Years of Combined Experience

10

Dedicated Bays

Two BMW X series SUVs with Defcon Films Australia Glanz film rolls

PPF on the panels that get hit, ceramic coating over the rest, window tint if you want it, bundled at a sharper price for a brand new car. See the packages.

Mercedes G63 with Defcon Films Australia Frozen film roll

Explore Our Services

Colour Transformation: a full colour change in Spectra Colour PPF, no vinyl, no respray.

Ceramic Coating: Gtechniq ceramic and graphene coatings for gloss that rinses clean.

Window Tinting: 3M and Defcon Films Australia films fitted to Victorian legal limits.

Detailing: paint correction, interior deep cleans and PPF refresh.

Customer cars in the Liquid R workshop

St Albans to Mitcham

Allow roughly 60 minutes from St Albans outside peak hour. The route is about 46.5 km via Eastern Freeway and CityLink, ending at 12/23A Cook Road, Mitcham, where there is parking out the front. Directions and opening hours are on our contact page.

Paint protection film being trimmed on a panel

Film on a New Car First

Film bonds best to paint that has never seen a freeway, so the ideal booking is straight from the dealer. We photograph any delivery defects before covering them, and new car packages bundle film with coating and tint.

Paint protection film being sprayed and laid on a red Audi

Wear and Tear Pack from $380

Door cups, door edges and the boot ledge pick up marks on every car, however carefully it is driven. This pack covers them in clear film and is the cheapest way to keep a car looking looked after at trade-in.

Volkswagen Amarok with Bushwrapz in the Liquid R studio

Freeway Kilometres on Eastern Freeway

Coming from St Albans usually means time on Eastern Freeway. Sitting behind traffic at freeway speed is the classic recipe for a chipped bonnet edge and a pitted bumper, which is why a full front is where most commuters start.

Front end of a red Audi RS3

What Moves a PPF Quote

Panel area sets the base price and shape does the rest: a deep bumper full of sensors and vents takes far more film and time than a flat bonnet. Swirled or resprayed paint is machine polished first, from $850, because film shows what is under it. The full breakdown is in our PPF cost guide.

Wash mitt on a soapy panel

Washing a Filmed Car

pH neutral shampoo, a soft mitt, no brush car washes, and keep the pressure washer a hand span from film edges. Bird droppings and sap should come off promptly, and stubborn water spots come out at our counter in minutes. The full routine is on our aftercare page.

Customer cars in the Liquid R workshop

One Workshop, in Mitcham

We have no branch out near St Albans, only our Mitcham workshop. If the drive suits you, the work is done indoors by staff who do this every day, and the booking is planned around a single trip. More about who we are, and if you are comparing shops, our guide to the best PPF in Melbourne lists what to check.

Red Tesla Model Y in the Liquid R studio

Planning the Visit

Headlight film is under an hour, a full front about two days and full body film about a week. From St Albans, most people bundle work into one visit: tint with a detail, or film with a coating, so the car only makes the trip once. We confirm the timing when you book.

Front end of a green Mercedes G-Class in matte PPF

Full Front PPF from $1980

Bonnet, front bumper, guards and mirrors in self-healing film, about two days in the workshop. Freeway gravel lands almost entirely on the front third of a car, which is why most daily drivers stop here.

Location Map

Map showing the Liquid R workshop location in Mitcham Melbourne

Google Map

Customer Reviews

Real reviews from Liquid R customers, verified and published by hand.

Rated 5 out of 5 from 89 verified customer reviews.

Submit a Review


Common Questions

Frequently asked questions

Straight answers before you book. Anything else, call 1800 985 880.

How far is Liquid R from St Albans?

The workshop at 12/23A Cook Road, Mitcham is about 46.5 km from St Albans, roughly 60 minutes by car outside peak hour.

Do St Albans customers pay the same price?

Yes. Every price is the same wherever you live. The quote depends on the car and the work, never the postcode.

Do you come to me, or do I bring the car in?

Every job is done at our Mitcham workshop. Film, coatings and tint need clean indoor bays and proper lighting, which a driveway cannot give, and that is what our results depend on.

Can PPF go on a used car?

Yes. The paint is decontaminated and machine polished where needed first, then filmed.

Does PPF turn yellow?

Quality film is UV stable and warranted against yellowing by its maker. Yellowing is a problem of budget film.