Ceramic Coating Templestowe

Ceramic Coating Templestowe: Done in Mitcham

Looking for ceramic coating near Templestowe? Liquid R is about 11.9 km away in Mitcham, roughly 20 minutes by car outside peak hour. Ceramic coating starts at $980 on bare paint, including decontamination and machine polish, and new car packages start at $1090.

Preparation is most of the job: a foam pre-wash, iron and tar removal, clay and machine polishing under inspection lights before the coating goes on. We use Gtechniq Crystal Serum Light and Envoke ProCoat+ 7 Year Graphene Coating, cured indoors.

Customers from Templestowe pay the same as everyone else, because the price follows the car and the work. Call 1800 985 880 or text 0483 930 888 to book.

Contact Us

Get in touch with us or stop on by to say hey

Give us a call or drop by anytime:
P: 1800 985 880
E: info@liquidr.com.au
A: 12/23A Cook Road Mitcham VIC 3132

Opening hours:
8:30am-5:00pm Monday to Friday
8:30am-12:30pm Saturday

Enquiry & Booking


5000

Vehicles Protected

1000

m² Workshop

50

Years of Combined Experience

10

Dedicated Bays

Two Toyota LandCruiser Prados in the Liquid R studio

PPF on the panels that get hit, ceramic coating over the rest, window tint if you want it, bundled at a sharper price for a brand new car. See the packages.

Technician levelling a ceramic coating on a black panel

Explore Our Services

Paint Protection Film: self-healing film for the panels stone chips hit first.

Colour Transformation: a full colour change in Spectra Colour PPF, no vinyl, no respray.

Window Tinting: 3M and Defcon Films Australia films fitted to Victorian legal limits.

Detailing: paint correction, interior deep cleans and PPF refresh.

Customer cars in the Liquid R workshop

Templestowe to Mitcham

Allow roughly 20 minutes from Templestowe outside peak hour. The route is about 11.9 km via Blackburn Road, ending at 12/23A Cook Road, Mitcham, where there is parking out the front. Directions and opening hours are on our contact page.

Ceramic coating being applied with an applicator block

What a Coating Does

The coating bonds to the clear coat and fills the tiny pores that make paint grab dirt. Rain beads and rolls off, bugs release with a rinse, and the clear coat is shielded from UV and chemical staining.

Ceramic coating being applied with an applicator block

Coating Versus Wax

Wax sits on top of the paint and gives up within weeks to sun and shampoo. A ceramic coating bonds and stays for years. Most of our coating customers are former regular waxers who did the sums. More in our ceramic coating myths article.

Wash mitt on a soapy panel

Trees, Birds and Parking Outside

Cars parked on the street or under trees collect sap and bird droppings that etch bare paint in the sun. A coated surface buys time and releases them with a gentle wash.

Customer cars in the Liquid R workshop

Preparation Decides the Result

Foam pre-wash, two bucket contact wash, iron and tar removal, clay, then machine polishing under inspection lights. Skip any step and you seal dirt and swirls under glass. This preparation, the same work as a cut and polish, is most of the labour and most of the price.

Wash mitt on a soapy panel

Washing a Coated Car

pH neutral shampoo, a rinse before contact, no brush car washes, and a clean towel or blower to dry, as set out in our guide to washing a coated car. Done that way the coating keeps beading and nothing gritty gets dragged across the paint.

Silver Tesla Model 3 in the Liquid R studio

Templestowe Customers, One Workshop

We do not have a Templestowe branch, and we do not need one: Templestowe is one of the closest areas to our Mitcham workshop. Every ceramic coating job is done indoors in our own bays by our own team, never by a mobile van in your driveway. More about who we are, and if you are comparing shops, our guide to the best ceramic coating in Melbourne lists what to check.

Red Tesla Model Y in the Liquid R studio

Booking and Turnaround

Coatings need curing time, so most cars stay with us for a couple of days. Tell us when you can drop off and collect, and we schedule the job around those times. We are open weekdays 8:30am to 5:00pm and Saturdays to 12:30pm.

Leather protection being applied to a cream seat

Leather and Fabric Coating

Gtechniq L1 on leather and I1 on fabric slow how fast spills soak in, so coffee and sunscreen wipe away instead of staining. Popular on light interiors and family cars.

Water beading on ceramic coated paint

Near Templestowe

Our ceramic coating page has the full range and prices. Nearby, we have also written up Ceramic Coating in Doncaster, Ceramic Coating in Eltham, Ceramic Coating in Greensborough, Ceramic Coating in Heidelberg and Ceramic Coating in Blackburn, and the local area guides cover the rest of Melbourne.

Location Map

Map showing the Liquid R workshop location in Mitcham Melbourne

Google Map

Customer Reviews

Real reviews from Liquid R customers, verified and published by hand.

Rated 5 out of 5 from 89 verified customer reviews.

Submit a Review


Common Questions

Frequently asked questions

Straight answers before you book. Anything else, call 1800 985 880.

How far is Liquid R from Templestowe?

The workshop at 12/23A Cook Road, Mitcham is about 11.9 km from Templestowe, roughly 20 minutes by car outside peak hour.

Is pricing different for Templestowe?

No. Every price is the same wherever you live. The quote depends on the car and the work, never the postcode.

Do you come to me, or do I bring the car in?

Every job is done at our Mitcham workshop. Film, coatings and tint need clean indoor bays and proper lighting, which a driveway cannot give, and that is what our results depend on.

Why not use a DIY ceramic kit?

DIY kits skip the preparation. Applied over contaminated, uncorrected paint they lock in the problems and last a fraction as long.

Can you coat an older car?

Yes. Older paint is decontaminated and corrected first, then coated, and often shows the biggest change.