Ceramic Coating Frankston

Ceramic Coating for Frankston Drivers

Frankston drivers come to Liquid R in Mitcham for ceramic coating. The workshop is about 40.8 km from Frankston, roughly 40 minutes by car outside peak hour. Ceramic coating starts at $980 on bare paint, including decontamination and machine polish, and new car packages start at $1090.

Preparation is most of the job: a foam pre-wash, iron and tar removal, clay and machine polishing under inspection lights before the coating goes on. We use Gtechniq Crystal Serum Light and Envoke ProCoat+ 7 Year Graphene Coating, cured indoors.

Every quote is a fixed figure before the car is booked, and it is the same whichever suburb you come from. Call 1800 985 880 or text 0483 930 888 to book.

Contact Us

Get in touch with us or stop on by to say hey

Give us a call or drop by anytime:
P: 1800 985 880
E: info@liquidr.com.au
A: 12/23A Cook Road Mitcham VIC 3132

Opening hours:
8:30am-5:00pm Monday to Friday
8:30am-12:30pm Saturday

Enquiry & Booking


5000

Vehicles Protected

1000

m² Workshop

50

Years of Combined Experience

10

Dedicated Bays

Two Toyota LandCruiser Prados in the Liquid R studio

PPF on the panels that get hit, ceramic coating over the rest, window tint if you want it, bundled at a sharper price for a brand new car. See the packages.

Technician levelling a ceramic coating on a black panel

Explore Our Services

Paint Protection Film: self-healing film for the panels stone chips hit first.

Colour Transformation: a full colour change in Spectra Colour PPF, no vinyl, no respray.

Window Tinting: 3M and Defcon Films Australia films fitted to Victorian legal limits.

Detailing: paint correction, interior deep cleans and PPF refresh.

Customer cars in the Liquid R workshop

The Drive from Frankston

Allow roughly 40 minutes from Frankston outside peak hour. The route is about 40.8 km via EastLink and Frankston Freeway, ending at 12/23A Cook Road, Mitcham, where there is parking out the front. Directions and opening hours are on our contact page.

Ceramic coating being applied with an applicator block

Ceramic Coating from $980

On bare paint, ceramic coating starts at $980. That price includes the part of the job that decides the result: decontamination, iron and tar removal, clay and a single stage machine polish before the coating goes on.

Wash mitt on a soapy panel

Washing a Coated Car

pH neutral shampoo, a rinse before contact, no brush car washes, and a clean towel or blower to dry, as set out in our guide to washing a coated car. Done that way the coating keeps beading and nothing gritty gets dragged across the paint.

Wash mitt on a soapy panel

Salt Rinses Off

Near the water in Frankston, salt residue builds up on paint between washes. A ceramic coating gives it nothing to grip, so a rinse does most of the work.

Water beading on ceramic coated paint

How Long It Lasts

A professionally applied coating protects for two to five years in normal Melbourne use, and well maintained cars have stretched ours toward nine. The wash routine makes most of the difference, and our list of mistakes to avoid after a coating covers the rest.

Ceramic coating being applied with an applicator block

What a Coating Does

The coating bonds to the clear coat and fills the tiny pores that make paint grab dirt. Rain beads and rolls off, bugs release with a rinse, and the clear coat is shielded from UV and chemical staining.

Customer cars in the Liquid R workshop

One Workshop, in Mitcham

Let us be straight: Mitcham is not around the corner from Frankston. What you get for the drive is indoor bays, inspection lighting and our own team on your car, rather than a van in a car park. More about who we are, and if you are comparing shops, our guide to the best ceramic coating in Melbourne lists what to check.

Porsche Panamera GTS in the Liquid R studio

Planning the Visit

Coatings need curing time, so most cars stay with us for a couple of days. From Frankston, most people bundle work into one visit: tint with a detail, or film with a coating, so the car only makes the trip once. We confirm the timing when you book.

Water beading on ceramic coated paint

Gtechniq Trained Since 2015

We have been coating cars in Mitcham since 2015 as Gtechniq trained applicators, and we use the full Gtechniq range every week alongside Envoke graphene in our new car packs.

Location Map

Map showing the Liquid R workshop location in Mitcham Melbourne

Google Map

Customer Reviews

Real reviews from Liquid R customers, verified and published by hand.

Rated 5 out of 5 from 89 verified customer reviews.

Submit a Review


Common Questions

Frequently asked questions

Straight answers before you book. Anything else, call 1800 985 880.

How far is Liquid R from Frankston?

The workshop at 12/23A Cook Road, Mitcham is about 40.8 km from Frankston, roughly 40 minutes by car outside peak hour.

Do Frankston customers pay the same price?

No. Every price is the same wherever you live. The quote depends on the car and the work, never the postcode.

Do you come to me, or do I bring the car in?

Every job is done at our Mitcham workshop. Film, coatings and tint need clean indoor bays and proper lighting, which a driveway cannot give, and that is what our results depend on.

Is a ceramic coating worth it?

If you keep the car more than a couple of years, usually yes. It replaces the wax cycle and keeps the paint from dulling.

Does a ceramic coating stop stone chips?

No. It protects against UV, staining, water spots and wash marks. Stone chips need paint protection film.