Ceramic Coating Carlton

Ceramic Coating near Carlton

Carlton drivers come to Liquid R in Mitcham for ceramic coating. The workshop is about 25.1 km from Carlton, roughly 35 minutes by car outside peak hour. Ceramic coating starts at $980 on bare paint, including decontamination and machine polish, and new car packages start at $1090.

We have coated cars in Mitcham since 2015 as Gtechniq trained applicators. Wheels can be coated for $60 each, and leather and fabric protection is part of the higher new car packages.

Every quote is a fixed figure before the car is booked, and it is the same whichever suburb you come from. Call 1800 985 880 or text 0483 930 888 to book.

Contact Us

Get in touch with us or stop on by to say hey

Give us a call or drop by anytime:
P: 1800 985 880
E: info@liquidr.com.au
A: 12/23A Cook Road Mitcham VIC 3132

Opening hours:
8:30am-5:00pm Monday to Friday
8:30am-12:30pm Saturday

Enquiry & Booking


5000

Vehicles Protected

1000

m² Workshop

50

Years of Combined Experience

10

Dedicated Bays

Two Toyota LandCruiser Prados in the Liquid R studio

PPF on the panels that get hit, ceramic coating over the rest, window tint if you want it, bundled at a sharper price for a brand new car. See the packages.

Technician levelling a ceramic coating on a black panel

Explore Our Services

Paint Protection Film: self-healing film for the panels stone chips hit first.

Colour Transformation: a full colour change in Spectra Colour PPF, no vinyl, no respray.

Window Tinting: 3M and Defcon Films Australia films fitted to Victorian legal limits.

Detailing: paint correction, interior deep cleans and PPF refresh.

Customer cars in the Liquid R workshop

The Drive from Carlton

Allow roughly 35 minutes from Carlton outside peak hour. The route is about 25.1 km via Eastern Freeway, ending at 12/23A Cook Road, Mitcham, where there is parking out the front. Directions and opening hours are on our contact page.

Ceramic coating being applied with an applicator block

Gtechniq Trained Since 2015

We have been coating cars in Mitcham since 2015 as Gtechniq trained applicators, and we use the full Gtechniq range every week alongside Envoke graphene in our new car packs.

Wash mitt on a soapy panel

New Car Packages from $1090

Pack Essential, $1090, uses Gtechniq Crystal Serum Light. Pack 1, $1390, steps up to Envoke ProCoat+ 7 Year Graphene Coating, and the higher packs add interior protection, wheel coating, tint and front end film. All five are on the packages page.

BYD Shark 6 with Bushwrapz in the Liquid R studio

Road Grime From the Commute

Freeway driving on roads like Eastern Freeway coats a car in road film, bugs and brake dust. A ceramic coating lets most of it rinse off, so the car stays clean longer between washes.

Ceramic coating being applied with an applicator block

Ceramic Coating from $980

On bare paint, ceramic coating starts at $980. That price includes the part of the job that decides the result: decontamination, iron and tar removal, clay and a single stage machine polish before the coating goes on.

Water beading on ceramic coated paint

What a Coating Does Not Do

A coating is microns thick. It will not stop a stone chip and it will not fill existing scratches. Chips need paint protection film, and scratches need correction before the coating locks them in.

Customer cars in the Liquid R workshop

One Workshop, in Mitcham

Liquid R has one workshop, in Mitcham, and Carlton customers come to it. That is deliberate: ceramic coating work needs clean indoor bays and proper lighting that a mobile setup cannot match, and every job is done by our own team. More about who we are, and if you are comparing shops, our guide to the best ceramic coating in Melbourne lists what to check.

Water beading on ceramic coated paint

How Long the Car Stays

Coatings need curing time, so most cars stay with us for a couple of days. Tell us when you can drop off and collect, and we schedule the job around those times. We are open weekdays 8:30am to 5:00pm and Saturdays to 12:30pm.

Ceramic coating dripping from a pipette onto dark green paint

Coating an Older Car

Older paint often shows the biggest change. The process is the same: decontaminate, correct what correction can fix, then coat. The coating locks in the corrected finish and makes it far easier to keep.

Location Map

Map showing the Liquid R workshop location in Mitcham Melbourne

Google Map

Customer Reviews

Real reviews from Liquid R customers, verified and published by hand.

Rated 5 out of 5 from 89 verified customer reviews.

Submit a Review


Common Questions

Frequently asked questions

Straight answers before you book. Anything else, call 1800 985 880.

How far is Liquid R from Carlton?

The workshop at 12/23A Cook Road, Mitcham is about 25.1 km from Carlton, roughly 35 minutes by car outside peak hour.

Is pricing different for Carlton?

No. Every price is the same wherever you live. The quote depends on the car and the work, never the postcode.

Do you come to me, or do I bring the car in?

Every job is done at our Mitcham workshop. Film, coatings and tint need clean indoor bays and proper lighting, which a driveway cannot give, and that is what our results depend on.

Can you coat an older car?

Yes. Older paint is decontaminated and corrected first, then coated, and often shows the biggest change.

Does my car need correction before coating?

If the paint has swirls or scratches, yes, because the coating seals in what is underneath. New cars usually need only a light polish.